Since the installation, the second station can print all navigator reports but not checks.

We have reinstalled checkform navigator 3.0 on the second station (Print Port "file LPT1"). Why can we only print checks on the first station?

From the work station, select Start | Settings | Printers. Right click on the printer and select Properties. On the Details tab, select Capture Printer Port. Set the Device: to the port set when CFN was installed such as LPT1. Set the Path: to the network printer. Be sure to check the option to [x] Reconnect at logon. So the settings will be remember when the workstation is restarted.

Note: if the workstation has a local printer attached to LPT1 then CFN should be re-installed to use a different port such as LPT2. Otherwise everything sent to the local printer on LPT1 will be captured and redirected to the network printer.