John Administrator
|
posted 03-27-2001 11:33 AM
If everything was working before, then when CFN was reinstalled, it may have been installed to the local printer (lpt1) instead of the network printer(lpt1). Since the default is for the local printer, then it could have been selected instead of the network printer (lpt1).You can go back and reinstall CFN and select the Network printer (lpt1). Or edit the file 'default.des' in the FN program folder using notepad. On the line "device lpt1" change it to "device file lpt1". This will use the network printer. Still on each workstation the lpt1 printer port must be captured and redirected to the network printer. (Start | Settings | Printers)
IP: Logged |