New printer MICR is garbled - Navigator User Forums

Navigator User Forums

New printer MICR is garbled

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: New printer MICR is garbled
David Administrator	posted 03-29-2005 01:05 PM We just upgraded printers and moved the DIMM chip from the old printer to the new one. We understood that this particular chip works with both of our printers. But now the MICR code on the checks prints as a garbled mess of characters. IP: Logged
fni_support Moderator	posted 03-29-2005 01:10 PM Since you know the DIMM chip should work on both printers, try this: Reseat chip: Turn off printer, remove chip, replace chip, test again. Print font list: Use the buttons on the printer control panel to print the "PCL Font List." You should have 25 fonts, including a MICR font. Test chip on old printer: Return the chip to the old printer and see if it still works there. Please let us know the results. IP: Logged
David Administrator	posted 03-29-2005 01:10 PM Thanks! Reseating the chip fixed it. IP: Logged

All times are PT (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Home

Copyright 2010 Financial Navigator, Inc.

Ultimate Bulletin Board 5.47e