Navigator User Forums
  CheckForm
  MICR font scrunched together

Post New Topic  Post A Reply
profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone! next newest topic | next oldest topic
Author Topic:   MICR font scrunched together
FN_User
Member 		posted 06-19-2007 04:10 PM     Click Here to See the Profile for FN_User     Edit/Delete Message
I upgraded to CheckForm 4.0 and everything works except the MICR font at the bottom of the check is too close together. The characters are actually touching on another.

IP: Logged

fni_support
Moderator 		posted 06-19-2007 04:11 PM     Click Here to See the Profile for fni_support     Edit/Delete Message
If you are printing to the same printer you used with CheckForm 3.2, that printer still has a MICR font cartridge or DIMM chip in it. Probably it is getting confused because it is getting the software MICR font from the new CheckForm but it already has a hardware MICR font. Try printing to a different printer or removing the MICR font cartridge or DIMM chip from the old printer.
- David
FNI Technical Support

IP: Logged

FN_User
Member 		posted 06-19-2007 04:11 PM     Click Here to See the Profile for FN_User     Edit/Delete Message
Thanks! I swiched pritners and now the MICR font is fine.

IP: Logged

All times are PT (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Home

Copyright 2010 Financial Navigator, Inc.


Ultimate Bulletin Board 5.47e